WAGO

WAGO

Sensor/Actuator cable; M12A socket; straight; 5-pole; Length: 10 m
756-5301/050-100

Sensor/Actuator cable; M12A socket; straight; 5-pole; Length: 10 m

Demande de devis

Sensor/Actuator cable; M12A socket; angled; M12A plug; straight; 5-pole; Length: 1 m
756-5403/060-010

Sensor/Actuator cable; M12A socket; angled; M12A plug; straight; 5-pole; Length: 1 m

Demande de devis

Marker card; Plastic; blue
770-450/000-006

Marker card; Plastic; blue

Demande de devis

T-distribution connector; 3-pole; Cod. R; 1 input; 2 outputs; 2 locking levers; orange
770-667

T-distribution connector; 3-pole; Cod. R; 1 input; 2 outputs; 2 locking levers; orange

Demande de devis

WINSTA® through-panel plug (male); snap-in; L/G/N marking; 3-pole; with direct ground contact; white
770-733/007-000

WINSTA® through-panel plug (male); snap-in; L/G/N marking; 3-pole; with direct ground contact; white

Demande de devis

IP65 enclosure; Polyester (RAL 7032); WxHxD (164x100x164 mm); 9 x M12, 4 x M20
850-834

IP65 enclosure; Polyester (RAL 7032); WxHxD (164x100x164 mm); 9 x M12, 4 x M20

Demande de devis

2-conductor terminal strip; without push-buttons; with snap-in mounting feet; 6-pole; for plate thickness 0.6 - 1.2 mm; Fixing hole 3.5 + 0.1 mm Ø; 2.5 mm²; CAGE CLAMP®; 2,50 mm²; gray
869-156

2-conductor terminal strip; without push-buttons; with snap-in mounting feet; 6-pole; for plate thickness 0.6 - 1.2 mm; Fixing hole 3.5 + 0.1 mm Ø; 2.5 mm²; CAGE CLAMP®; 2,50 mm²; gray

Demande de devis

Insulating tape for flat cable; 5-pole/3-pole; for flat cable 10 mm²; acid green
897-901

Insulating tape for flat cable; 5-pole/3-pole; for flat cable 10 mm²; acid green

Demande de devis

End plate; 0.8 mm thick; gray
2002-2791

End plate; 0.8 mm thick; gray

Demande de devis

TOPJOB®S ground terminal block; rail mount; 4-conductor; 4.2 mm wide; green-yellow
2001-1407

TOPJOB®S ground terminal block; rail mount; 4-conductor; 4.2 mm wide; green-yellow

Demande de devis

2-conductor supply terminal blocks for distribution boxes; 16 mm²; side and center marking; for DIN-rail 35 x 15 and 35 x 7.5; Push-in CAGE CLAMP®; 16,00 mm²; gray
2016-7601

2-conductor supply terminal blocks for distribution boxes; 16 mm²; side and center marking; for DIN-rail 35 x 15 and 35 x 7.5; Push-in CAGE CLAMP®; 16,00 mm²; gray

Demande de devis

Relay module; Nominal input voltage: 24 VDC; 4 changeover contacts; Limiting continuous current: 5 A; with manual operation; Red status indicator; Module width: 31 mm; 1,50 mm²
858-304

Relay module; Nominal input voltage: 24 VDC; 4 changeover contacts; Limiting continuous current: 5 A; with manual operation; Red status indicator; Module width: 31 mm; 1,50 mm²

Demande de devis

End and intermediate plate; 4 mm thick; orange
282-312

End and intermediate plate; 4 mm thick; orange

Demande de devis

WSB marking card; as card; MARKED; 61 / 62 (50 each); not stretchable; Horizontal marking; snap-on type; white
209-405

WSB marking card; as card; MARKED; 61 / 62 (50 each); not stretchable; Horizontal marking; snap-on type; white

Demande de devis

PCB terminal block; push-button; 0.5 mm²; Pin spacing 2.5 mm; 21-pole; Push-in CAGE CLAMP®; 0,50 mm²; gray
250-321

PCB terminal block; push-button; 0.5 mm²; Pin spacing 2.5 mm; 21-pole; Push-in CAGE CLAMP®; 0,50 mm²; gray

Demande de devis

Female connector; without ground contact; with snap-in mounting feet; 6-pole; 1,00 mm²; white
267-166

Female connector; without ground contact; with snap-in mounting feet; 6-pole; 1,00 mm²; white

Demande de devis

3-conductor sensor/actuator terminal block; with colored conductor entries; 2.5 mm²; CAGE CLAMP®; 2,50 mm²; orange
270-586

3-conductor sensor/actuator terminal block; with colored conductor entries; 2.5 mm²; CAGE CLAMP®; 2,50 mm²; orange

Demande de devis

Through-panel PCB terminal strip; 2 solder pins/pole; 16-pole; with integrated push-buttons; pin spacing 5 mm / 0.197 in; with fixing flanges; gray
741-146

Through-panel PCB terminal strip; 2 solder pins/pole; 16-pole; with integrated push-buttons; pin spacing 5 mm / 0.197 in; with fixing flanges; gray

Demande de devis

PCB terminal block; 2.5 mm²; Pin spacing 5 mm; 1-pole; CAGE CLAMP®; 2,50 mm²; gray
789-134

PCB terminal block; 2.5 mm²; Pin spacing 5 mm; 1-pole; CAGE CLAMP®; 2,50 mm²; gray

Demande de devis

TOPJOB®S jumper; for 2000 series; insulated; 2-way (1-7); light-gray
2000-437

TOPJOB®S jumper; for 2000 series; insulated; 2-way (1-7); light-gray

Demande de devis

Industrial managed switch; 8 - 10/100/1000 Mb/s ports; 4 - 1000 Mb/s Fiber Optic ports
852-1305

Industrial managed switch; 8 - 10/100/1000 Mb/s ports; 4 - 1000 Mb/s Fiber Optic ports

Demande de devis

End plate; 1.5 mm thick; with lock-out seal option; gray
2007-8893

End plate; 1.5 mm thick; with lock-out seal option; gray

Demande de devis

End plate; 1 mm thick; orange
2010-7192

End plate; 1 mm thick; orange

Demande de devis

THT male header; 1.0 x 1.0 mm solder pin; angled; Threaded flange; Pin spacing 5.08 mm; 9-pole; orange
231-539/108-000

THT male header; 1.0 x 1.0 mm solder pin; angled; Threaded flange; Pin spacing 5.08 mm; 9-pole; orange

Demande de devis

Through-panel PCB terminal strip; angled solder pin 1x1.2 mm; 5-pole; with fixing flanges; pin spacing 5 mm / 0.197 in; gray
231-605/017-000

Through-panel PCB terminal strip; angled solder pin 1x1.2 mm; 5-pole; with fixing flanges; pin spacing 5 mm / 0.197 in; gray

Demande de devis

1-conductor male connector; CAGE CLAMP®; 2.5 mm²; Pin spacing 5.08 mm; 15-pole; Snap-in flange; 2,50 mm²; orange
231-645/129-000

1-conductor male connector; CAGE CLAMP®; 2.5 mm²; Pin spacing 5.08 mm; 15-pole; Snap-in flange; 2,50 mm²; orange

Demande de devis

Terminal block with varistor and end plate; with direct connection to DIN rail; 60 VDC
280-502/281-584

Terminal block with varistor and end plate; with direct connection to DIN rail; 60 VDC

Demande de devis

Component terminal block; 2-conductor; with diode 1N4007; anode, left side; for DIN-rail 35 x 15 and 35 x 7.5; 4 mm²; CAGE CLAMP®; 4,00 mm²; gray
281-915/281-410

Component terminal block; 2-conductor; with diode 1N4007; anode, left side; for DIN-rail 35 x 15 and 35 x 7.5; 4 mm²; CAGE CLAMP®; 4,00 mm²; gray

Demande de devis

THT female header; straight; Pin spacing 5 mm; 7-pole; 100% protected against mismating; clamping collar; 0.6 x 1.0 mm solder pin; light gray
722-137/031-000

THT female header; straight; Pin spacing 5 mm; 7-pole; 100% protected against mismating; clamping collar; 0.6 x 1.0 mm solder pin; light gray

Demande de devis

THT female header; angled; Pin spacing 5 mm; 15-pole; 100% protected against mismating; Spacer flange; 0.6 x 1.0 mm solder pin; light gray
722-245/047-000

THT female header; angled; Pin spacing 5 mm; 15-pole; 100% protected against mismating; Spacer flange; 0.6 x 1.0 mm solder pin; light gray

Demande de devis