Accueil/wago/

WAGO

WAGO

4-conductor sensor terminal block; with colored conductor entries; 1 mm²; Push-in CAGE CLAMP®; 1,00 mm²; gray
2000-5420/1399-987

4-conductor sensor terminal block; with colored conductor entries; 1 mm²; Push-in CAGE CLAMP®; 1,00 mm²; gray

Demande de devis

JUMPFLEX® signal conditioner; RTD threshold value switch; with picoMAX® connector; configurable
2857-533

JUMPFLEX® signal conditioner; RTD threshold value switch; with picoMAX® connector; configurable

Demande de devis

Marking strips; on reel; not stretchable; plain; snap-on type
757-901/000-050

Marking strips; on reel; not stretchable; plain; snap-on type

Demande de devis

Plug; with strain relief housing; 5-pole; Cod. A; 4,00 mm²; white
770-335

Plug; with strain relief housing; 5-pole; Cod. A; 4,00 mm²; white

Demande de devis

POWER CAGE CLAMP ground terminal block; suitable for Ex e II applications; DIN 35 x 15 rail mount; 2-conductor; 2 AWG; 16 mm wide; green-yellow
285-607/999-950

POWER CAGE CLAMP ground terminal block; suitable for Ex e II applications; DIN 35 x 15 rail mount; 2-conductor; 2 AWG; 16 mm wide; green-yellow

Demande de devis

2-channel digital output; 24 VDC; 2.0 A; Diagnostics
753-508

2-channel digital output; 24 VDC; 2.0 A; Diagnostics

Demande de devis

System cable; for Rockwell Control Logix; 8 analog inputs (current); Length: 3 m; Conductor cross-section: 0.25 mm²
706-4756/402-300

System cable; for Rockwell Control Logix; 8 analog inputs (current); Length: 3 m; Conductor cross-section: 0.25 mm²

Demande de devis

THT female header; straight; Pin spacing 5.08 mm; 2-pole; 0.6 x 1.0 mm solder pin; orange
232-162

THT female header; straight; Pin spacing 5.08 mm; 2-pole; 0.6 x 1.0 mm solder pin; orange

Demande de devis

1-conductor male connector; CAGE CLAMP®; 1.5 mm²; Pin spacing 3.5 mm; 24-pole; 100% protected against mismating; Threaded flange; 1,50 mm²; light gray
734-324/109-000

1-conductor male connector; CAGE CLAMP®; 1.5 mm²; Pin spacing 3.5 mm; 24-pole; 100% protected against mismating; Threaded flange; 1,50 mm²; light gray

Demande de devis

1-conductor male connector; CAGE CLAMP®; 2.5 mm²; Pin spacing 5 mm; 8-pole; clamping collar; 2,50 mm²; gray
231-608/019-000

1-conductor male connector; CAGE CLAMP®; 2.5 mm²; Pin spacing 5 mm; 8-pole; clamping collar; 2,50 mm²; gray

Demande de devis

1-conductor male connector; CAGE CLAMP®; 2.5 mm²; Pin spacing 5.08 mm; 3-pole; Snap-in flange; 2,50 mm²; orange
231-633/129-000

1-conductor male connector; CAGE CLAMP®; 2.5 mm²; Pin spacing 5.08 mm; 3-pole; Snap-in flange; 2,50 mm²; orange

Demande de devis

THT male header; 1.0 x 1.0 mm solder pin; angled; Pin spacing 7.5 mm; 16-pole; gray
231-846/001-000

THT male header; 1.0 x 1.0 mm solder pin; angled; Pin spacing 7.5 mm; 16-pole; gray

Demande de devis

Male header; 5-pole; THT; 1.2 x 1.2 mm solder pin; straight; pin spacing 7.5 mm; gray
231-265/001-000

Male header; 5-pole; THT; 1.2 x 1.2 mm solder pin; straight; pin spacing 7.5 mm; gray

Demande de devis

THT male header; 1.0 x 1.0 mm solder pin; straight; 100% protected against mismating; Pin spacing 3.81 mm; 3-pole; orange
734-233

THT male header; 1.0 x 1.0 mm solder pin; straight; 100% protected against mismating; Pin spacing 3.81 mm; 3-pole; orange

Demande de devis

THT male header; 1.0 x 1.0 mm solder pin; straight; clamping collar; Pin spacing 5 mm; 11-pole; gray
769-641/003-000

THT male header; 1.0 x 1.0 mm solder pin; straight; clamping collar; Pin spacing 5 mm; 11-pole; gray

Demande de devis

THT male header, 2-row; 0.8 x 0.8 mm solder pin; angled; 100% protected against mismating; Threaded flange; Pin spacing 3.5 mm; 6-pole; black
713-1423/107-000

THT male header, 2-row; 0.8 x 0.8 mm solder pin; angled; 100% protected against mismating; Threaded flange; Pin spacing 3.5 mm; 6-pole; black

Demande de devis

T-distribution connector; 4-pole; Cod. A; 1 input; 2 outputs; 3 locking levers; for flying leads; black
890-627

T-distribution connector; 4-pole; Cod. A; 1 input; 2 outputs; 3 locking levers; for flying leads; black

Demande de devis

Locking lever; for sockets and plugs; for tool operation; gray
770-140

Locking lever; for sockets and plugs; for tool operation; gray

Demande de devis

Spacer Module; Active
753-1629

Spacer Module; Active

Demande de devis

Tap-off module; modular; suitable for 870 Series terminal blocks with jumper slots in the current bar; gray
870-426

Tap-off module; modular; suitable for 870 Series terminal blocks with jumper slots in the current bar; gray

Demande de devis

End module for 2-conductor female connector; CAGE CLAMP®; 4 mm²; Pin spacing 5 mm; 1-pole; coding finger; 4,00 mm²; green-yellow
769-506/000-016

End module for 2-conductor female connector; CAGE CLAMP®; 4 mm²; Pin spacing 5 mm; 1-pole; coding finger; 4,00 mm²; green-yellow

Demande de devis

TOPJOB®S quadruple-deck terminal block; through/through(L2/L1); rail mount; 2-conductor; 5.2 mm wide; gray
2002-4111

TOPJOB®S quadruple-deck terminal block; through/through(L2/L1); rail mount; 2-conductor; 5.2 mm wide; gray

Demande de devis

2-conductor terminal strip; without push-buttons; with snap-in mounting feet; 4-pole; for plate thickness 0.6 - 1.2 mm; Fixing hole 3.5 + 0.1 mm Ø; 2.5 mm²; CAGE CLAMP®; 2,50 mm²; gray
869-154

2-conductor terminal strip; without push-buttons; with snap-in mounting feet; 4-pole; for plate thickness 0.6 - 1.2 mm; Fixing hole 3.5 + 0.1 mm Ø; 2.5 mm²; CAGE CLAMP®; 2,50 mm²; gray

Demande de devis

4-conductor chassis-mount terminal strip; suitable for Ex e II applications; without ground contact; PE-N-L1; 3-pole; 1 snap-in foot per pole; 4 mm²; 4,00 mm²; white
862-1633/999-950

4-conductor chassis-mount terminal strip; suitable for Ex e II applications; without ground contact; PE-N-L1; 3-pole; 1 snap-in foot per pole; 4 mm²; 4,00 mm²; white

Demande de devis

4-conductor through terminal block; with push-button; 2.5 mm²; with test option; same profile as 4-conductor disconnect terminal block; side and center marking; for DIN-rail 35 x 15 and 35 x 7.5; Push-in CAGE CLAMP®; 2,50 mm²; blue
2202-1804

4-conductor through terminal block; with push-button; 2.5 mm²; with test option; same profile as 4-conductor disconnect terminal block; side and center marking; for DIN-rail 35 x 15 and 35 x 7.5; Push-in CAGE CLAMP®; 2,50 mm²; blue

Demande de devis

Stackable PCB terminal block; 16 mm²; Pin spacing 10 mm; 1-pole; CAGE CLAMP®; commoning option; 16,00 mm²; gray
745-851/006-000

Stackable PCB terminal block; 16 mm²; Pin spacing 10 mm; 1-pole; CAGE CLAMP®; commoning option; 16,00 mm²; gray

Demande de devis

4-conductor terminal block; without push-buttons; with snap-in mounting foot; 1-pole; for plate thickness 0.6 - 1.2 mm; Fixing hole 3.5 mm Ø; 4 mm²; CAGE CLAMP®; 4,00 mm²; green-yellow
262-357

4-conductor terminal block; without push-buttons; with snap-in mounting foot; 1-pole; for plate thickness 0.6 - 1.2 mm; Fixing hole 3.5 mm Ø; 4 mm²; CAGE CLAMP®; 4,00 mm²; green-yellow

Demande de devis

PCB terminal block; 4 mm²; Pin spacing 11.5 mm; 12-pole; Push-in CAGE CLAMP®; 4,00 mm²; gray
2624-1512

PCB terminal block; 4 mm²; Pin spacing 11.5 mm; 12-pole; Push-in CAGE CLAMP®; 4,00 mm²; gray

Demande de devis

PCB terminal block; lever; 4 mm²; Pin spacing 7.5 mm; 2-pole; Push-in CAGE CLAMP®; 4,00 mm²; gray
2604-3302

PCB terminal block; lever; 4 mm²; Pin spacing 7.5 mm; 2-pole; Push-in CAGE CLAMP®; 4,00 mm²; gray

Demande de devis

Optocoupler module; Nominal input voltage: 5 VDC; Output voltage range: 0 … 24 VDC; Module width: 6 mm; gray
859-753

Optocoupler module; Nominal input voltage: 5 VDC; Output voltage range: 0 … 24 VDC; Module width: 6 mm; gray

Demande de devis

Précédent383 / 969Suivant