EPSITRON® power supply; single-phase; output voltage 24 VDC; 10 A

Relay module; Nominal input voltage: 24 VDC; 4 changeover contacts; Limiting continuous current: 6 A; with manual operation; Red status indicator; Module width: 31 mm; 1,50 mm²

8-channel digital input; 24 VDC; 0.2 ms

4-channel analog input; 0 ... 10 VDC; Single-ended

4-channel digital output; 24 VDC; 0.5 A; Low-side switching

Fieldbus Coupler CANopen

Fieldbus Coupler DeviceNet; ECO

Fieldbus Coupler INTERBUS

751-610 différent

RS-232 communication cable; length 1.8 m

1-conductor/1-pin carrier terminal block; for DIN-rail 35 x 15 and 35 x 7.5; 4 mm²; CAGE CLAMP®; 4,00 mm²; blue

Actuator terminal block; for PNP (high side) switching actuators; with ground contact; 2-pole; rail mount; 3-conductor; 7 mm wide; gray

Mounting carrier, 221 series (24-12 AWG); 3-conductor; for panel mount; white

Plug; 3-pole; Cod. P; 4,00 mm²; red

2-conductor through terminal block; 16 mm²; center marking; for DIN-rail 35 x 15 and 35 x 7.5; CAGE CLAMP®; 16,00 mm²; gray

750-301 Profibus Fieldbus Coupler

Electronic circuit breaker; 1-channel; 24 VDC input voltage; adjustable 1 … 8 A; Signal contact

Lighting connector; push-button, external; without ground contact; 2-pole; Lighting side: for solid conductors; Inst. side: for all conductor types; max. 2.5 mm²; Surrounding air temperature: max 85°C (T85); 2,50 mm²; white

POWER CAGE CLAMP ground terminal block; DIN 35 x 15 rail mount; 2-conductor; 4/0 AWG; 25 mm wide; green-yellow

Strain relief plate; for female and male connectors; 35 mm wide; 1 part; Pin spacing 3.5 mm; light gray

Request a quote

Marking strips; as a DIN A4 sheet; MARKED; PE (1200x); Strip width 6 mm; Strip length 182 mm; Horizontal marking; Self-adhesive; white

Request a quote

Insulation stop; 0.08-0.2 mm² / 0.2 mm² “s”; white

Request a quote

PCB terminal block; 1.5 mm²; Pin spacing 3.5 mm; 9-pole; CAGE CLAMP®; 1,50 mm²; gray

Request a quote

Distribution terminal block; 10 mm²; lateral marker slots; for DIN-rail 35 x 15 and 35 x 7.5; screw-type and CAGE CLAMP®connection; 3 x CAGE CLAMP® connection 10 mm²; 1 x screw-clamp connection 35 mm²; 10,00 mm²; blue

Request a quote

Through-panel PCB terminal strip; angled solder pin 1x1.2 mm; 5-pole; with fixing flanges; pin spacing 5.08 mm / 0.2 in; orange

Request a quote

Double-deck PCB terminal block; 2.5 mm²; Pin spacing 7.62 mm; 8-pole; CAGE CLAMP®; 2,50 mm²; orange

Request a quote

PCB terminal block; 2.5 mm²; Pin spacing 5/5.08 mm; 24-pole; CAGE CLAMP®; commoning option; 2,50 mm²; gray

Request a quote

16-channel digital output; 24 VDC; 0.5 A

Request a quote

WRF07-P RS-485 Room Control Unit, MODBUS, in-wall, temperature, setpoint

Request a quote

Shield connecting plate; 3-pole; for sockets and plugs; silver-colored

Request a quote