Home/wago/

WAGO

WAGO

THT double-deck male header; 1.0 x 1.0 mm solder pin; angled; 100% protected against mismating; Pin spacing 3.5 mm; 8-pole; light gray
734-404/001-000

THT double-deck male header; 1.0 x 1.0 mm solder pin; angled; 100% protected against mismating; Pin spacing 3.5 mm; 8-pole; light gray

Request a quote

MICRO PUSH WIRE® connector for junction boxes; 4-conductor; AWG 22 - 18 solid; yellow
243-308

MICRO PUSH WIRE® connector for junction boxes; 4-conductor; AWG 22 - 18 solid; yellow

Request a quote

h-distribution connector; 4-pole; Cod. B; 1 input; 2 outputs; outputs on one side; 3 locking levers; for flying leads; pink
770-1783

h-distribution connector; 4-pole; Cod. B; 1 input; 2 outputs; outputs on one side; 3 locking levers; for flying leads; pink

Request a quote

h-distribution connector; 4-pole; Cod. B; 1 input; 2 outputs; outputs on one side; 2 locking levers; light green
770-1682

h-distribution connector; 4-pole; Cod. B; 1 input; 2 outputs; outputs on one side; 2 locking levers; light green

Request a quote

T-distribution connector; 4-pole; Cod. B; 1 input; 2 outputs; 3 locking levers; for flying leads; pink
890-1733

T-distribution connector; 4-pole; Cod. B; 1 input; 2 outputs; 3 locking levers; for flying leads; pink

Request a quote

Stickers for operating instructions; for front-entry rail-mounted terminal blocks, angled type; 280 and 281, 780 to 784 Series
210-183

Stickers for operating instructions; for front-entry rail-mounted terminal blocks, angled type; 280 and 281, 780 to 784 Series

Request a quote

Interface module; with solder pin; Male connector; 25-pole; Double-deck PCB terminal blocks; in mounting carrier; Mating connector for solder connection; 2,50 mm²
289-722

Interface module; with solder pin; Male connector; 25-pole; Double-deck PCB terminal blocks; in mounting carrier; Mating connector for solder connection; 2,50 mm²

Request a quote

Interface module; Pluggable connector per DIN 41651; 64-pole; PCB terminal blocks, triple-row; in mounting carrier; 2,50 mm²
289-510

Interface module; Pluggable connector per DIN 41651; 64-pole; PCB terminal blocks, triple-row; in mounting carrier; 2,50 mm²

Request a quote

8-level terminal block for matrix patching; with locking clips; one potential per level; with 2.3 mm Ø test port; marking: 7-6-5-4-3-2-1-0--0-1-2-3-4-5-6-7; for 35 x 15 mounting rail; 1.5 mm²; 1,50 mm²; gray
727-129/003-000

8-level terminal block for matrix patching; with locking clips; one potential per level; with 2.3 mm Ø test port; marking: 7-6-5-4-3-2-1-0--0-1-2-3-4-5-6-7; for 35 x 15 mounting rail; 1.5 mm²; 1,50 mm²; gray

Request a quote

Double-deck double-disconnect terminal block; 2 knife disconnects; disconnect/disconnect (N/L); rail mount; 2-conductor; 5.2 mm wide; gray
2002-2952

Double-deck double-disconnect terminal block; 2 knife disconnects; disconnect/disconnect (N/L); rail mount; 2-conductor; 5.2 mm wide; gray

Request a quote

2-conductor terminal strip; on one side with push-buttons; with fixing flanges; 8-pole; for screw or similar mounting types; Fixing hole 3.2 mm Ø; 2.5 mm²; CAGE CLAMP®; 2,50 mm²; gray
261-108/331-000

2-conductor terminal strip; on one side with push-buttons; with fixing flanges; 8-pole; for screw or similar mounting types; Fixing hole 3.2 mm Ø; 2.5 mm²; CAGE CLAMP®; 2,50 mm²; gray

Request a quote

2-conductor miniature ground terminal block; with operating slots; 1 mm²; with test port; side and center marking; for DIN-15 rail; Push-in CAGE CLAMP®; 1,00 mm²; green-yellow
2050-1207

2-conductor miniature ground terminal block; with operating slots; 1 mm²; with test port; side and center marking; for DIN-15 rail; Push-in CAGE CLAMP®; 1,00 mm²; green-yellow

Request a quote

3-conductor through terminal block; 4 mm²; center marking; for DIN-rail 35 x 15 and 35 x 7.5; CAGE CLAMP®; 4,00 mm²; red
281-679

3-conductor through terminal block; 4 mm²; center marking; for DIN-rail 35 x 15 and 35 x 7.5; CAGE CLAMP®; 4,00 mm²; red

Request a quote

2-conductor PCB terminal block; 0.75 mm²; Pin spacing 5/5.08 mm; 3-pole; PUSH WIRE®; 0,75 mm²; gray
235-453

2-conductor PCB terminal block; 0.75 mm²; Pin spacing 5/5.08 mm; 3-pole; PUSH WIRE®; 0,75 mm²; gray

Request a quote

4-conductor terminal block; without push-buttons; with snap-in mounting foot; 1-pole; for plate thickness 0.6 - 1.2 mm; Fixing hole 3.5 mm Ø; 1.5 mm²; CAGE CLAMP®; 1,50 mm²; orange
260-346

4-conductor terminal block; without push-buttons; with snap-in mounting foot; 1-pole; for plate thickness 0.6 - 1.2 mm; Fixing hole 3.5 mm Ø; 1.5 mm²; CAGE CLAMP®; 1,50 mm²; orange

Request a quote

PCB terminal block; lever; 16 mm²; Pin spacing 15 mm; 8-pole; CAGE CLAMP®; 16,00 mm²; gray
2716-208

PCB terminal block; lever; 16 mm²; Pin spacing 15 mm; 8-pole; CAGE CLAMP®; 16,00 mm²; gray

Request a quote

PCB terminal block; Pin spacing 15 mm; double pinning; 5-pole; Push-in CAGE CLAMP®; gray
2636-3355

PCB terminal block; Pin spacing 15 mm; double pinning; 5-pole; Push-in CAGE CLAMP®; gray

Request a quote

Through-panel PCB terminal strip; angled solder pin 1x1.2 mm; 6-pole; with fixing flanges; pin spacing 5 mm / 0.197 in; for flush mounting; gray
231-606/023-000

Through-panel PCB terminal strip; angled solder pin 1x1.2 mm; 6-pole; with fixing flanges; pin spacing 5 mm / 0.197 in; for flush mounting; gray

Request a quote

Through-panel PCB terminal strip; angled solder pin 1x1.2 mm; 3-pole; with fixing flanges; pin spacing 5.08 mm / 0.2 in; orange
231-633/017-000

Through-panel PCB terminal strip; angled solder pin 1x1.2 mm; 3-pole; with fixing flanges; pin spacing 5.08 mm / 0.2 in; orange

Request a quote

PCB terminal block; 1.5 mm²; Pin spacing 3.5 mm; 4-pole; PUSH WIRE®; 1,50 mm²; white
744-304/364-000

PCB terminal block; 1.5 mm²; Pin spacing 3.5 mm; 4-pole; PUSH WIRE®; 1,50 mm²; white

Request a quote

PCB terminal block; 2.5 mm²; Pin spacing 5 mm; 16-pole; CAGE CLAMP®; 2,50 mm²; gray
740-116

PCB terminal block; 2.5 mm²; Pin spacing 5 mm; 16-pole; CAGE CLAMP®; 2,50 mm²; gray

Request a quote

PCB terminal block; push-button; 1.5 mm²; Pin spacing 3.5 mm; 3-pole; Push-in CAGE CLAMP®; with test port; 1,50 mm²; gray
805-103

PCB terminal block; push-button; 1.5 mm²; Pin spacing 3.5 mm; 3-pole; Push-in CAGE CLAMP®; with test port; 1,50 mm²; gray

Request a quote

Mounting plate; 3-pole; for distribution connectors; Plastic; black
890-623

Mounting plate; 3-pole; for distribution connectors; Plastic; black

Request a quote

End plate; snap-fit type; 1 mm thick; orange
235-600

End plate; snap-fit type; 1 mm thick; orange

Request a quote

Jumper; 3-way; unplated; silver-colored
745-283

Jumper; 3-way; unplated; silver-colored

Request a quote

Socket; 5-pole; Cod. B; 4,00 mm²; gray
770-245/062-000

Socket; 5-pole; Cod. B; 4,00 mm²; gray

Request a quote

Socket for PCBs; angled; 3-pole; Cod. B; gray
890-843/011-000

Socket for PCBs; angled; 3-pole; Cod. B; gray

Request a quote

Sensor/Actuator cable; M12A plug; straight; 5-pole; Length: 1.5 m
756-5311/050-015

Sensor/Actuator cable; M12A plug; straight; 5-pole; Length: 1.5 m

Request a quote

System bus cable; M12B socket; angled; M12B plug; angled; 5-pole; Length: 20 m
756-1306/060-200

System bus cable; M12B socket; angled; M12B plug; angled; 5-pole; Length: 20 m

Request a quote

Split-core current transformer; 60 A / 1 A; 3 m long
855-3001/060-003

Split-core current transformer; 60 A / 1 A; 3 m long

Request a quote

Previous109 / 969Next