WAGO
WAGO
756-5301/050-100
Sensor/Actuator cable; M12A socket; straight; 5-pole; Length: 10 m
Request a quote
756-5403/060-010
Sensor/Actuator cable; M12A socket; angled; M12A plug; straight; 5-pole; Length: 1 m
Request a quote
770-450/000-006
Marker card; Plastic; blue
Request a quote
770-667
T-distribution connector; 3-pole; Cod. R; 1 input; 2 outputs; 2 locking levers; orange
Request a quote
770-733/007-000
WINSTA® through-panel plug (male); snap-in; L/G/N marking; 3-pole; with direct ground contact; white
Request a quote
850-834
IP65 enclosure; Polyester (RAL 7032); WxHxD (164x100x164 mm); 9 x M12, 4 x M20
Request a quote
869-156
2-conductor terminal strip; without push-buttons; with snap-in mounting feet; 6-pole; for plate thickness 0.6 - 1.2 mm; Fixing hole 3.5 + 0.1 mm Ø; 2.5 mm²; CAGE CLAMP®; 2,50 mm²; gray
Request a quote
897-901
Insulating tape for flat cable; 5-pole/3-pole; for flat cable 10 mm²; acid green
Request a quote
2002-2791
End plate; 0.8 mm thick; gray
Request a quote
2001-1407
TOPJOB®S ground terminal block; rail mount; 4-conductor; 4.2 mm wide; green-yellow
Request a quote
2016-7601
2-conductor supply terminal blocks for distribution boxes; 16 mm²; side and center marking; for DIN-rail 35 x 15 and 35 x 7.5; Push-in CAGE CLAMP®; 16,00 mm²; gray
Request a quote
858-304
Relay module; Nominal input voltage: 24 VDC; 4 changeover contacts; Limiting continuous current: 5 A; with manual operation; Red status indicator; Module width: 31 mm; 1,50 mm²
Request a quote
282-312
End and intermediate plate; 4 mm thick; orange
Request a quote
209-405
WSB marking card; as card; MARKED; 61 / 62 (50 each); not stretchable; Horizontal marking; snap-on type; white
Request a quote
250-321
PCB terminal block; push-button; 0.5 mm²; Pin spacing 2.5 mm; 21-pole; Push-in CAGE CLAMP®; 0,50 mm²; gray
Request a quote
267-166
Female connector; without ground contact; with snap-in mounting feet; 6-pole; 1,00 mm²; white
Request a quote
270-586
3-conductor sensor/actuator terminal block; with colored conductor entries; 2.5 mm²; CAGE CLAMP®; 2,50 mm²; orange
Request a quote
741-146
Through-panel PCB terminal strip; 2 solder pins/pole; 16-pole; with integrated push-buttons; pin spacing 5 mm / 0.197 in; with fixing flanges; gray
Request a quote
789-134
PCB terminal block; 2.5 mm²; Pin spacing 5 mm; 1-pole; CAGE CLAMP®; 2,50 mm²; gray
Request a quote
2000-437
TOPJOB®S jumper; for 2000 series; insulated; 2-way (1-7); light-gray
Request a quote
852-1305
Industrial managed switch; 8 - 10/100/1000 Mb/s ports; 4 - 1000 Mb/s Fiber Optic ports
Request a quote
2007-8893
End plate; 1.5 mm thick; with lock-out seal option; gray
Request a quote
2010-7192
End plate; 1 mm thick; orange
Request a quote
231-539/108-000
THT male header; 1.0 x 1.0 mm solder pin; angled; Threaded flange; Pin spacing 5.08 mm; 9-pole; orange
Request a quote
231-605/017-000
Through-panel PCB terminal strip; angled solder pin 1x1.2 mm; 5-pole; with fixing flanges; pin spacing 5 mm / 0.197 in; gray
Request a quote
231-645/129-000
1-conductor male connector; CAGE CLAMP®; 2.5 mm²; Pin spacing 5.08 mm; 15-pole; Snap-in flange; 2,50 mm²; orange
Request a quote
280-502/281-584
Terminal block with varistor and end plate; with direct connection to DIN rail; 60 VDC
Request a quote
281-915/281-410
Component terminal block; 2-conductor; with diode 1N4007; anode, left side; for DIN-rail 35 x 15 and 35 x 7.5; 4 mm²; CAGE CLAMP®; 4,00 mm²; gray
Request a quote
722-137/031-000
THT female header; straight; Pin spacing 5 mm; 7-pole; 100% protected against mismating; clamping collar; 0.6 x 1.0 mm solder pin; light gray
Request a quote
722-245/047-000
THT female header; angled; Pin spacing 5 mm; 15-pole; 100% protected against mismating; Spacer flange; 0.6 x 1.0 mm solder pin; light gray
Request a quote