Home/wago/

WAGO

WAGO

Jumper; 2-way; silver-colored
885-412

Jumper; 2-way; silver-colored

Request a quote

Through-panel PCB terminal strip; wire-wrap pin 1 x 1 mm; 6-pole; pin spacing 5 mm / 0.197 in; for flush-mounting; gray
731-136/048-000

Through-panel PCB terminal strip; wire-wrap pin 1 x 1 mm; 6-pole; pin spacing 5 mm / 0.197 in; for flush-mounting; gray

Request a quote

Disconnect terminal block; knife disconnect; with additional jumper location; rail mount; 2-conductor; 5.2 mm wide; blue
2002-1974

Disconnect terminal block; knife disconnect; with additional jumper location; rail mount; 2-conductor; 5.2 mm wide; blue

Request a quote

4-level terminal block for matrix patching; with locking clips; one potential per level; with 2.3 mm Ø test port; marking: a-b-c-d--d-c-b-a; for 35 x 7.5 mounting rail; 1.5 mm²; 1,50 mm²; blue
727-223/022-000

4-level terminal block for matrix patching; with locking clips; one potential per level; with 2.3 mm Ø test port; marking: a-b-c-d--d-c-b-a; for 35 x 7.5 mounting rail; 1.5 mm²; 1,50 mm²; blue

Request a quote

System cable; for Rockwell Control Logix; 8 analog inputs (voltage), var. 1; Length: 1 m; Conductor cross-section: 0.25 mm²
706-4756/405-100

System cable; for Rockwell Control Logix; 8 analog inputs (voltage), var. 1; Length: 1 m; Conductor cross-section: 0.25 mm²

Request a quote

3-way distribution connector; 5-pole; Cod. B; 1 input; 3 outputs; gray
770-1744

3-way distribution connector; 5-pole; Cod. B; 1 input; 3 outputs; gray

Request a quote

THT female header; straight; Pin spacing 5 mm; 8-pole; 100% protected against mismating; 0.6 x 1.0 mm solder pin; light gray
722-138

THT female header; straight; Pin spacing 5 mm; 8-pole; 100% protected against mismating; 0.6 x 1.0 mm solder pin; light gray

Request a quote

THT female header; straight; Pin spacing 3.81 mm; 6-pole; 100% protected against mismating; Locking lever; 0.9 x 0.9 mm solder pin; orange
734-506/037-000

THT female header; straight; Pin spacing 3.81 mm; 6-pole; 100% protected against mismating; Locking lever; 0.9 x 0.9 mm solder pin; orange

Request a quote

THT female header; angled; Pin spacing 3.5 mm; 10-pole; 100% protected against mismating; Locking lever; 0.9 x 0.9 mm solder pin; light gray
734-540/037-000

THT female header; angled; Pin spacing 3.5 mm; 10-pole; 100% protected against mismating; Locking lever; 0.9 x 0.9 mm solder pin; light gray

Request a quote

THT female header; angled; Pin spacing 5 mm; 17-pole; Spacer flange; 0.6 x 1.0 mm solder pin; gray
232-247/047-000

THT female header; angled; Pin spacing 5 mm; 17-pole; Spacer flange; 0.6 x 1.0 mm solder pin; gray

Request a quote

THT female header; angled; Pin spacing 5.08 mm; 9-pole; clamping collar; 0.6 x 1.0 mm solder pin; orange
232-269/031-000

THT female header; angled; Pin spacing 5.08 mm; 9-pole; clamping collar; 0.6 x 1.0 mm solder pin; orange

Request a quote

1-conductor male connector; CAGE CLAMP®; 2.5 mm²; Pin spacing 5 mm; 8-pole; 100% protected against mismating; 2,50 mm²; light gray
721-608

1-conductor male connector; CAGE CLAMP®; 2.5 mm²; Pin spacing 5 mm; 8-pole; 100% protected against mismating; 2,50 mm²; light gray

Request a quote

1-conductor male connector; CAGE CLAMP®; 0.5 mm²; Pin spacing 2.5 mm; 6-pole; 100% protected against mismating; 0,50 mm²; light gray
733-206

1-conductor male connector; CAGE CLAMP®; 0.5 mm²; Pin spacing 2.5 mm; 6-pole; 100% protected against mismating; 0,50 mm²; light gray

Request a quote

1-conductor male connector; CAGE CLAMP®; 2.5 mm²; Pin spacing 7.62 mm; 8-pole; clamping collar; 2,50 mm²; orange
731-638/019-000

1-conductor male connector; CAGE CLAMP®; 2.5 mm²; Pin spacing 7.62 mm; 8-pole; clamping collar; 2,50 mm²; orange

Request a quote

THT male header; 1.0 x 1.0 mm solder pin; angled; Pin spacing 5 mm; 8-pole; gray
769-668

THT male header; 1.0 x 1.0 mm solder pin; angled; Pin spacing 5 mm; 8-pole; gray

Request a quote

THT male header, 2-row; 0.8 x 0.8 mm solder pin; angled; 100% protected against mismating; Threaded flange; Pin spacing 3.5 mm; 8-pole; black
713-1424/107-000

THT male header, 2-row; 0.8 x 0.8 mm solder pin; angled; 100% protected against mismating; Threaded flange; Pin spacing 3.5 mm; 8-pole; black

Request a quote

Protective warning marker; for 5 terminal blocks; with high-voltage symbol, black; yellow
284-415

Protective warning marker; for 5 terminal blocks; with high-voltage symbol, black; yellow

Request a quote

Empty component plug housing; 4-pole; transparent housing; with fiber optics
2042-321

Empty component plug housing; 4-pole; transparent housing; with fiber optics

Request a quote

T-distribution connector; 2-pole; Cod. I; 1 input; 2 outputs; 2 locking levers; blue
890-1617

T-distribution connector; 2-pole; Cod. I; 1 input; 2 outputs; 2 locking levers; blue

Request a quote

4-level same potential terminal block; without locking clips; all clamping units internally commoned; with 2.3 mm Ø test port; marking: d-c-b-a--a-b-c-d; for 35 x 15 mounting rail; 1.5 mm²; 1,50 mm²; light gray
727-238/024-000

4-level same potential terminal block; without locking clips; all clamping units internally commoned; with 2.3 mm Ø test port; marking: d-c-b-a--a-b-c-d; for 35 x 15 mounting rail; 1.5 mm²; 1,50 mm²; light gray

Request a quote

8-level same potential terminal block; without locking clips; all clamping units internally commoned; with 2.3 mm Ø test port; marking: 7-6-5-4-3-2-1-0--0-1-2-3-4-5-6-7; for 35 x 7.5 mounting rail; 1.5 mm²; 1,50 mm²; orange
727-126/003-000

8-level same potential terminal block; without locking clips; all clamping units internally commoned; with 2.3 mm Ø test port; marking: 7-6-5-4-3-2-1-0--0-1-2-3-4-5-6-7; for 35 x 7.5 mounting rail; 1.5 mm²; 1,50 mm²; orange

Request a quote

2-conductor terminal strip; without push-buttons; with snap-in mounting feet; 10-pole; for plate thickness 0.6 - 1.2 mm; Fixing hole 3.5 mm Ø; 2.5 mm²; CAGE CLAMP®; 2,50 mm²; gray
264-160

2-conductor terminal strip; without push-buttons; with snap-in mounting feet; 10-pole; for plate thickness 0.6 - 1.2 mm; Fixing hole 3.5 mm Ø; 2.5 mm²; CAGE CLAMP®; 2,50 mm²; gray

Request a quote

2-conductor terminal strip; without push-buttons; with snap-in mounting feet; 12-pole; for plate thickness 0.6 - 1.2 mm; Fixing hole 3.5 mm Ø; 2.5 mm²; CAGE CLAMP®; 2,50 mm²; gray
264-162

2-conductor terminal strip; without push-buttons; with snap-in mounting feet; 12-pole; for plate thickness 0.6 - 1.2 mm; Fixing hole 3.5 mm Ø; 2.5 mm²; CAGE CLAMP®; 2,50 mm²; gray

Request a quote

2-conductor terminal strip; without push-buttons; with snap-in mounting feet; 5-pole; for plate thickness 0.6 - 1.2 mm; Fixing hole 3.5 mm Ø; 2.5 mm²; CAGE CLAMP®; 2,50 mm²; gray
261-155

2-conductor terminal strip; without push-buttons; with snap-in mounting feet; 5-pole; for plate thickness 0.6 - 1.2 mm; Fixing hole 3.5 mm Ø; 2.5 mm²; CAGE CLAMP®; 2,50 mm²; gray

Request a quote

POWER CAGE CLAMP feedthrough terminal block; with fixing flanges; 2-conductor; 4/0 AWG; 25 mm wide; dark gray-yellow
285-187

POWER CAGE CLAMP feedthrough terminal block; with fixing flanges; 2-conductor; 4/0 AWG; 25 mm wide; dark gray-yellow

Request a quote

TOPJOB®S feedthrough terminal block; rail mount; 3-conductor; 4.2 mm wide; orange
2001-1302

TOPJOB®S feedthrough terminal block; rail mount; 3-conductor; 4.2 mm wide; orange

Request a quote

Double-deck PCB terminal block; push-button; 1.5 mm²; Pin spacing 5 mm; 12-pole; Push-in CAGE CLAMP®; 1,50 mm²; agate gray
250-706

Double-deck PCB terminal block; push-button; 1.5 mm²; Pin spacing 5 mm; 12-pole; Push-in CAGE CLAMP®; 1,50 mm²; agate gray

Request a quote

Triple-deck PCB terminal block; 2.5 mm²; Pin spacing 5.08 mm; 24-pole; CAGE CLAMP®; 2,50 mm²; orange
737-408

Triple-deck PCB terminal block; 2.5 mm²; Pin spacing 5.08 mm; 24-pole; CAGE CLAMP®; 2,50 mm²; orange

Request a quote

Triple-deck PCB terminal block; 2.5 mm²; Pin spacing 10 mm; 9-pole; CAGE CLAMP®; 2,50 mm²; gray
737-753

Triple-deck PCB terminal block; 2.5 mm²; Pin spacing 10 mm; 9-pole; CAGE CLAMP®; 2,50 mm²; gray

Request a quote

Triple-deck PCB terminal block; 2.5 mm²; Pin spacing 10 mm; 18-pole; CAGE CLAMP®; 2,50 mm²; gray
737-756

Triple-deck PCB terminal block; 2.5 mm²; Pin spacing 10 mm; 18-pole; CAGE CLAMP®; 2,50 mm²; gray

Request a quote

Previous367 / 969Next