Home/wago/

WAGO

WAGO

1-conductor male connector; CAGE CLAMP®; 2.5 mm²; Pin spacing 7.5 mm; 5-pole; Preceding ground contact; 100% protected against mismating; DIN-35 rail/panel mounting; Snap-in mounting feet; direct marking; 2,50 mm²; light gray
723-605/018-042

1-conductor male connector; CAGE CLAMP®; 2.5 mm²; Pin spacing 7.5 mm; 5-pole; Preceding ground contact; 100% protected against mismating; DIN-35 rail/panel mounting; Snap-in mounting feet; direct marking; 2,50 mm²; light gray

Request a quote

1-conductor male connector; Push-in CAGE CLAMP®; 10 mm²; Pin spacing 7.62 mm; 6-pole; 100% protected against mismating; Strain relief plate; 10,00 mm²; light gray
831-3206/135-000

1-conductor male connector; Push-in CAGE CLAMP®; 10 mm²; Pin spacing 7.62 mm; 6-pole; 100% protected against mismating; Strain relief plate; 10,00 mm²; light gray

Request a quote

Male header; 11-pole; THT; 1.2 x 1.2 mm solder pin; straight; pin spacing 7.5 mm; gray
231-271/001-000

Male header; 11-pole; THT; 1.2 x 1.2 mm solder pin; straight; pin spacing 7.5 mm; gray

Request a quote

THT male header; straight; Pin spacing 5 mm; 7-pole; black
806-907

THT male header; straight; Pin spacing 5 mm; 7-pole; black

Request a quote

TOPJOB®S connector strip; for 2000 series; for jumper contact slot; 6-pole; gray
2000-556

TOPJOB®S connector strip; for 2000 series; for jumper contact slot; 6-pole; gray

Request a quote

1-conductor/1-conductor terminal block for pluggable modules; 4-pole; with 2-conductor terminal blocks; with 2 jumper positions; with orange separator plate; for DIN-rail 35 x 15 and 35 x 7.5; 4 mm²; CAGE CLAMP®; 4,00 mm²; gray
769-192/769-319

1-conductor/1-conductor terminal block for pluggable modules; 4-pole; with 2-conductor terminal blocks; with 2 jumper positions; with orange separator plate; for DIN-rail 35 x 15 and 35 x 7.5; 4 mm²; CAGE CLAMP®; 4,00 mm²; gray

Request a quote

4-level terminal block for matrix patching; without locking clips; one potential per level; with 2.3 mm Ø test port; marking: 0-1-2-3--3-2-1-0; for 35 x 15 mounting rail; 1.5 mm²; 1,50 mm²; blue
727-234/021-000

4-level terminal block for matrix patching; without locking clips; one potential per level; with 2.3 mm Ø test port; marking: 0-1-2-3--3-2-1-0; for 35 x 15 mounting rail; 1.5 mm²; 1,50 mm²; blue

Request a quote

2-Pin/2-pin double deck receptacle terminal block; Through/through terminal block; L/L; for DIN-rail 35 x 15 and 35 x 7.5; CAGE CLAMP®; gray
870-151

2-Pin/2-pin double deck receptacle terminal block; Through/through terminal block; L/L; for DIN-rail 35 x 15 and 35 x 7.5; CAGE CLAMP®; gray

Request a quote

Quadruple-deck PCB terminal block; 2.5 mm²; Pin spacing 5.08 mm; 48-pole; CAGE CLAMP®; 2,50 mm²; orange
738-412

Quadruple-deck PCB terminal block; 2.5 mm²; Pin spacing 5.08 mm; 48-pole; CAGE CLAMP®; 2,50 mm²; orange

Request a quote

PCB terminal block; 2.5 mm²; Pin spacing 5/5.08 mm; 4-pole; CAGE CLAMP®; commoning option; 2,50 mm²; gray
236-404

PCB terminal block; 2.5 mm²; Pin spacing 5/5.08 mm; 4-pole; CAGE CLAMP®; commoning option; 2,50 mm²; gray

Request a quote

THR PCB terminal block; Locking slides; 0.5 mm²; Pin spacing 2.54 mm; 4-pole; CAGE CLAMP®; 0,50 mm²; black
218-504/000-604

THR PCB terminal block; Locking slides; 0.5 mm²; Pin spacing 2.54 mm; 4-pole; CAGE CLAMP®; 0,50 mm²; black

Request a quote

THR PCB terminal block; push-button; 0.5 mm²; Pin spacing 2.5 mm; 2-pole; Push-in CAGE CLAMP®; 0,50 mm²; black
250-402/353-604

THR PCB terminal block; push-button; 0.5 mm²; Pin spacing 2.5 mm; 2-pole; Push-in CAGE CLAMP®; 0,50 mm²; black

Request a quote

Strain relief plate; for female and male connectors; 35 mm wide; 1 part; gray
734-326

Strain relief plate; for female and male connectors; 35 mm wide; 1 part; gray

Request a quote

Jumper; 2-way; silver-colored
745-392

Jumper; 2-way; silver-colored

Request a quote

Mini-WSB marking card; as card; MARKED; 0V (100x); not stretchable; Horizontal marking; snap-on type; white
247-506

Mini-WSB marking card; as card; MARKED; 0V (100x); not stretchable; Horizontal marking; snap-on type; white

Request a quote

WMB marking card; as card; MARKED; 119 / 120 (50 each); not stretchable; Horizontal marking; snap-on type; white
793-434

WMB marking card; as card; MARKED; 119 / 120 (50 each); not stretchable; Horizontal marking; snap-on type; white

Request a quote

WMB marking card; as card; MARKED; 801 ... 900 (1x); stretchable 5 - 5.2 mm; Vertical marking; snap-on type; white
793-5616

WMB marking card; as card; MARKED; 801 ... 900 (1x); stretchable 5 - 5.2 mm; Vertical marking; snap-on type; white

Request a quote

sercos cable; M12D plug; angled; M12D plug; angled; 4-pole; Length: 10 m
756-1604/060-100

sercos cable; M12D plug; angled; M12D plug; angled; 4-pole; Length: 10 m

Request a quote

Female plug; 18-pole; push-button; locking lever;12 AWG max; pin spacing 5 mm;1-conductor per pole; gray
2231-118/037-000

Female plug; 18-pole; push-button; locking lever;12 AWG max; pin spacing 5 mm;1-conductor per pole; gray

Request a quote

1-conductor female connector; CAGE CLAMP®; 1.5 mm²; Pin spacing 3.5 mm; 13-pole; 100% protected against mismating; Screw flange; 1,50 mm²; light gray
734-113/107-000

1-conductor female connector; CAGE CLAMP®; 1.5 mm²; Pin spacing 3.5 mm; 13-pole; 100% protected against mismating; Screw flange; 1,50 mm²; light gray

Request a quote

1-conductor female connector; CAGE CLAMP®; 1.5 mm²; Pin spacing 3.5 mm; 24-pole; 100% protected against mismating; Lateral locking levers; 1,50 mm²; light gray
734-124/037-000

1-conductor female connector; CAGE CLAMP®; 1.5 mm²; Pin spacing 3.5 mm; 24-pole; 100% protected against mismating; Lateral locking levers; 1,50 mm²; light gray

Request a quote

Multilevel installation terminal block; with push-button; 2.5 mm²; with N-disconnect slide link; LT/L; Push-in CAGE CLAMP®; 2,50 mm²; gray
2203-7659

Multilevel installation terminal block; with push-button; 2.5 mm²; with N-disconnect slide link; LT/L; Push-in CAGE CLAMP®; 2,50 mm²; gray

Request a quote

System cable; for Siemens S7-1500; 4 analog inputs and 2 analog outputs, voltage; Length: 1 m; Conductor cross-section: 0.25 mm²
706-2500/603-100

System cable; for Siemens S7-1500; 4 analog inputs and 2 analog outputs, voltage; Length: 1 m; Conductor cross-section: 0.25 mm²

Request a quote

System cable; for Schneider Modicon M340; 4 analog inputs (current); Length: 3 m; Conductor cross-section: 0.25 mm²
706-3340/400-300

System cable; for Schneider Modicon M340; 4 analog inputs (current); Length: 3 m; Conductor cross-section: 0.25 mm²

Request a quote

Seperator plate; 2 mm thick; oversized; gray
2004-1293

Seperator plate; 2 mm thick; oversized; gray

Request a quote

Jumper; from 1 to 3; insulated; light gray
2004-433

Jumper; from 1 to 3; insulated; light gray

Request a quote

Marking strips; for Smart Printer; cut to a defined length; MARKED; not stretchable; snap-on type; white
2009-110/762-854

Marking strips; for Smart Printer; cut to a defined length; MARKED; not stretchable; snap-on type; white

Request a quote

SMD PCB terminal block; push-button; 0.75 mm²; Pin spacing 6.5 mm; 1-pole; Push-in CAGE CLAMP®; in tape-and-reel packaging; Without housing; 0,75 mm²; silver-colored
2065-100/998-403

SMD PCB terminal block; push-button; 0.75 mm²; Pin spacing 6.5 mm; 1-pole; Push-in CAGE CLAMP®; in tape-and-reel packaging; Without housing; 0,75 mm²; silver-colored

Request a quote

Board-to-Board Link; Pin spacing 6.5 mm; Length: 17.6 mm; silver-colored
2065-133

Board-to-Board Link; Pin spacing 6.5 mm; Length: 17.6 mm; silver-colored

Request a quote

1-conductor THT female connector straight; push-button; Push-in CAGE CLAMP®; 1.5 mm²; Pin spacing 3.5 mm; 10-pole; 1.0 mm Ø solder pin; Gripping plate; direct marking; 1,50 mm²; light gray
2091-1160/000-1000

1-conductor THT female connector straight; push-button; Push-in CAGE CLAMP®; 1.5 mm²; Pin spacing 3.5 mm; 10-pole; 1.0 mm Ø solder pin; Gripping plate; direct marking; 1,50 mm²; light gray

Request a quote

Previous450 / 969Next