WAGO
WAGO
741-302
Through-panel PCB terminal strip; 2 solder pins/pole; 2-pole; with integrated push-buttons; pin spacing 7.5 mm / 0.295 in; gray
Request a quote
750-650/000-001
RS-232 C Serial Interface; 9600 baud; None; 8/1 bits; 5 bytes
Request a quote
756-1104/060-100
PROFIBUS cable; M12B plug; angled; 5-pole; Length: 10 m
Request a quote
769-613/006-000
X-COM® through-panel connector (male); CAGE CLAMP® connection; 13-pole; pole spacing 5 mm / 0.197 in; with adjustable snap-in flanges
Request a quote
770-503/032-000
Strain relief housing; 3-pole; with locking clip; for 2 cables; 8.0 … 11.5 mm; 55 mm; black
Request a quote
770-619
Intermediate coupler; 5-pole; Cod. I; for sockets and plugs; blue
Request a quote
793-4530
WMB marking card; as card; MARKED; 25 / 26 (50 each); stretchable 4 - 4.2 mm; Horizontal marking; snap-on type; white
Request a quote
793-675
WMB marking card; as card; MARKED; L2 (100x); not stretchable; Vertical marking; snap-on type; white
Request a quote
859-732
Optocoupler module; Nominal input voltage: 24 VDC; Output voltage range: 3 … 30 VDC; Limiting continuous current: 0.5 A; 1 changeover contact; Red status indicator; Module width: 6 mm; gray
Request a quote
862-8593
4-conductor chassis-mount terminal strip; with ground contact; N-PE-L1; 3-pole; 4 mm²; 4,00 mm²; black
Request a quote
862-9694
4-conductor chassis-mount terminal strip; with ground contact; PE-N-L1-L2; 4-pole; 4 mm²; 4,00 mm²; white
Request a quote
869-102
2-conductor terminal strip; without push-buttons; with fixing flanges M3; 2-pole; for screw or similar mounting types; Fixing hole 3.2 mm Ø; 2.5 mm²; CAGE CLAMP®; 2,50 mm²; gray
Request a quote
890-712
WINSTA® through-panel plug (male); MINI; snap-in; L/N marking; 2-pole; black
Request a quote
890-744
WINSTA® through-panel socket (female); MINI; snap-in through-panel; N/G/L2/L1 marking; 4-pole; gray
Request a quote
281-665/281-400
Component terminal block; 4-conductor; with diode 1N5408; anode, left side; for DIN-rail 35 x 15 and 35 x 7.5; 4 mm²; CAGE CLAMP®; 4,00 mm²; gray
Request a quote
2009-309
Operating tool; Blades: 3.5 x 0.5 mm and 2.5 x 0.4 mm; for TOPJOB®S installation terminal blocks
Request a quote
2006-1207
TOPJOB®S ground terminal block; rail mount; 2-conductor; 7.5 mm wide; green-yellow
Request a quote
750-455
4-channel analog input; 4 … 20 mA; Single-ended
Request a quote
773-173
PUSH WIRE® connector for junction boxes; 3-conductor; AWG 10; transparent housing; red face
Request a quote
216-545
Twin ferrule only for 811 series; Sleeve for 2 x 2.5 mm / AWG 14; insulated; Nominal current 63 A; blue
Request a quote
727-122
8-level terminal block for matrix patching; without locking clips; one potential per level; with 2.3 mm Ø test port; for 35 x 7.5 mounting rail; 1.5 mm²; 1,50 mm²; white
Request a quote
734-462
THT female header; straight; Pin spacing 3.5 mm; 2-pole; 100% protected against mismating; 0.9 x 0.9 mm solder pin; light gray
Request a quote
750-829
Controller BACnet MS/TP
Request a quote
805-364
PCB terminal block; push-button; 1.5 mm²; Pin spacing 3.5 mm; 14-pole; Push-in CAGE CLAMP®; 1,50 mm²; gray
Request a quote
869-152
2-conductor terminal strip; without push-buttons; with snap-in mounting feet; 2-pole; for plate thickness 0.6 - 1.2 mm; Fixing hole 3.5 + 0.1 mm Ø; 2.5 mm²; CAGE CLAMP®; 2,50 mm²; gray
Request a quote
870-826
Double potential terminal block; 2.5 mm²; side and center marking; for DIN-rail 35 x 15 and 35 x 7.5; CAGE CLAMP®; 2,50 mm²; gray
Request a quote
793-5678
WMB marking card; as card; MARKED; PE (100x); stretchable 5 - 5.2 mm; Vertical marking; snap-on type; white
Request a quote
895-1600
Marker card; white
Request a quote
2002-2296
TOPJOB®S end/intermediate plate; for 2002-22xx series terminal blocks; 2.0 mm wide; orange
Request a quote
2002-6402
TOPJOB®S feedthrough terminal block; angled profile; rail mount; 4-conductor; 5.2 mm wide; orange
Request a quote